Maker Faire is coming up at the end of April and I'm busily working on the projects I want to show there.
- VPO built from Schober keyboards, Gulbransen pedalboard, Dell Mini 9
- Arduino pocket piano with full size 2 octave keyboard
- Home built Etherwave Theremin
- C64 Muse - C64 with full size 2 octave keyboard
I don't think the MidiBox SID is going to happen any time soon.
Last night I finally finished bolting all the C64 Muse parts together. It's not pretty, but it's movable.
The VPO keyboards are mounted to the keydeck. I purchased the heavy duty rubber feet yesterday. There is an amazing selection of samples of different pipe organs to use. I'm also thinking of using some of littl-scale's sample libraries. This would give me a VPO with chiptune voices.
Parts orders have arrived from Smash TV (Midibox DIN and CORE boards), Mouser (VPO, Arduino pocket piano, Theremin coils)
The Midibox stuff should go together nicely. The DIN boards only have about 15 components, thanks to the resistor networks. I will likely buy more DIN and CORE boards and retrofit parts from the old boards.
The Arduino Pocket Piano keyboard is wired. These have been a bear to get working right. I mounted the micro switches on coat hanger wire that run through the end blocks. If I do this again, I'll likely premount smaller endblocks to the wire and create an assembly that can easily be adjusted. I going to attach the switches to a DB-25 connector and use a DB-25 straight through cable to connect the keyboard to the CPU. I'm planning to either put the parts in a piece of PVC, or just have everything out in the open. I could build the PP as a standalone piece of gear, but I believe I'll just use the BBB Arduino and build the APP as a Arduino shield.